What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 06:34

These devices are installed between the “hot” and “neutral” and protective ground.
The bolt then partially travels down the line to your home.
The other is “what does a “fuse” do?”
What is lightning?
2024–10–16 [ OO OLAOYE OYEBODE ]
Upvotes:
What is your best gay fantasy?
So, the voltage could go up to 500 volts, and the fuse will not open up.
I post the exact comment here.
But it can get overloaded, and no longer works.
what exactly is a ‘surge’ protector?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
the problem then depends on "how fast does the fuse operate?".
There are three different concepts here that are getting confused.
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then describes the function of a fuse.
Why have Indian girls almost stopped wearing sarees?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
At one ohm, the resistor has a maximum of 1 watt power.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Why do some men like anal sex?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What does a fuse do?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Is using tech to track or monitor your partner’s activities a sign of love, insecurity, or control?
An AC voltage/ current source, and an ac inductive load.
Here is a simplified AC power diagram.
Barnstars:
What are your darkest taboo confessions?
A circuit breaker is similar, but is resettable.
Because the load is inductive, the current lags the voltage.(by a bit).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Endometriosis is an interesting disease - Hacker News
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This device then solves the entire problem.
Is there anything you did that you regret? If so, what is it, and why?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
There are two important concepts here.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The #1 Herb for Better Gut Health, According to Dietitians - EatingWell
One
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It seems Mohan does not understand the difference between a comment and an Answer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is 'the assistant's answer'
One is “what exactly is in a ‘surge protector’ ? ”
First Sentence:
In schematic diagrams this is the symbol for a fuse:
This one hit behind the barn.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where the MOV conducts again, and dissipated the energy.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At least they know the answer if they wanted it.
A fuse is a non-resetable over current circuit protector.
Now when you have a certain ac resistance, then a current flows in a loop.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then asserts :
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
These are simplified answers to the original question, and does not change anything I wrote above.
For this case there are devices called Metal oxide varistors (MOV).
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
It also is a device that limits the change in current flow.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
but this device (an Inductor) … impedes the rapid changes in the current.
(Dc diagram shown, AC is similar).
but I think this circuit , shows a few more pieces.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
[old diagram got deleted by accident]
a photo is worth a thousand words.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
so, what happens?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
nine
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
eight
He then describes Rainy Season and Lightning.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is where this question deviates from being a 'generic' question, and becomes more specific.
The third is lightning and “how it gets conducted into a home.”
Edit 2024–10.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–10[John johnson John Johnson ]